|
||
|
|
| . | . | . | |
Products & Solutions |
|||
| Heat Transfer Equipment | |||
Process Gas Waste Heat Recovery Systems |
1. Air Fin Cooler | ||
| Membrane Technology Systems |
2. Threaded Closure Heat Exchangers | ||
| Sour Gas & Sulfur Technology |
3. Shell & Tube Heat Exchangers | ||
| Compression Systems |
4. Low and High Pressure Feedwater Heaters | ||
| Fired & Heat Recovery Boilers |
5. Slurry Heaters | ||
| Quench Coolers |
6. Rod baffles Licensed by ConocoPhilips | ||
| Scraped Surface Exchangers |
7. Helixchangers licensed by ABB Lummus Heat Transfer USA | ||
| Process & Pressure Vessels |
8. Heat Exchanger Tube support Technology licensed by ExxonMobil Research & Engineering | ||
| Heat Transfer Equipment |
9. Vacuum Condensers | ||
| Storage Facilities |
10. Welded Plate Heat Exchangers | ||
| Process Skid Packages & Modules |
11. Double Pipe Heat Exchangers | ||
Industrial & Power Plant Services
|
KNM was granted a license by Exxon Mobil Research and Engineering Company (EMRE) to manufacture and sell heat exchanger anti vibration technology. The technology can be applied to the new and existing tube bundle. In existing bundle, it allows the reused of tube bundle and minimizing risk of vibration damage, whereas in new bundle, it will reduce the baffle substantially compare to conventional method and allows optimum heat exchanger design. The technology consists of the following proprietary support strip developed by EMRE:- 1. DTS (dimple tube support) The strips are inserted into the affected vibration area. The tubes and strips will automatically lock each other into place. As a consequences, it will stiffened the bundle. The technology has been implemented successfully in over 100 bundles at refineries, LNG, chemical and petrochemical plants worldwide. |
||
Heat Transfer Heat Exchanger Tube support |
 |
 |
|||
|
 |
